General sanitation after construction is considered a very urgent task for the final period to complete the handover to the landlord and investor. In the construction phase, stains, paint stains, chemicals … clinging to the wall, on the glass, on the floor or the adhesive tape to protect the construction while remaining is inevitable.
From a developed country like Japan, AEon Delight Vietnam understands the importance of the apartment cleaning process after completing the installation and system layout.
Why is the post-construction cleaning service of AEon Delight Vietnam necessary:
– A pre-completed project: acceptance testing should be cleaned, removing excess equipment during construction, service department of AEon Delight Vietnam reviews, classifies and handles residuals This excess.
– Some construction errors stain powder, tong ve sinh sau xay dung hcm paint, and lake on stone floor, they need to be cleaned and scrubbed.
– Vacuum and clean the glass door.
General cleaning after professional construction in Hanoi and Ho Chi Minh City.
General cleaning after professional construction in Hanoi and Ho Chi Minh City.
Post-construction General cleaning service of AEon Delight Vietnam
– Clean up construction waste after the construction has been completed. These materials are scanned, neatly put into bags, boxes or disposed of at the designated places.
– Check sanitation of electrical and plumbing systems, limit the congestion state when using the landlord.
– Clean and vacuum, make the air in the room in front of the warehouse handed over, give the landlord living and working.
– Clean the stone floor, rub the floor, polish the door edges and partitions.
– Project cleaning process consists of 2 basic steps: Fine and rough part.
General post-construction sanitation for raw materials:
As a basic step before proceeding to make the industrial sanitation part always clean, this is the waste of the construction phase left behind after they leave the Project. AEon Delight Vietnam will classify according to the host’s proposal, pack and store the necessary equipment, and dispose of waste.
General post-construction sanitation for Part Tinh:
After cleaning the raw part, fine cleaning is an important process, with the completion of the Construction Works.
General post-construction cleaning for glass cleaning:
– Use cleaning chemicals, mop and rags, glass wiper, glass wiper for cleaning dust and stains such as cement, paint adhering to the outer surface of glass and aluminum frame.
Loading...
– Using specialized chemicals to make clean grease-based dirt due to dust, car exhaust, rain water, long-term environmental pollution. Using specialized chemicals and glasses for cleaning features in the glass surface, while neutralizing PH concentration on the glass surface, aluminum frame.
– Using specialized chemicals to clean all aluminum frames with features to make clean, gloss and protect on aluminum surfaces, anti-dust, anti-oxidation.
– Using a swing or scaffolding specialized to clean the glass above and outside (depending on the terrain and scale of the project).
General cleaning after construction with cleaning toilets:
– Use a dry towel to wrap the stainless steel devices to limit the stain and stain due to water stains (if new).
– Using floor scrubber, floor brush makes the dirty writing on the floor and walls glazed.
– Use reeds and chemicals that have a floor cleaning effect.
– Use soft felt and chemicals to clean the lighting system and sanitary equipment: Toilets, urinals, mirrors, hand sinks, partitions, hand towel, soap shelves, front glass and door blink behind …
– Use glass lens to make clean and bright mirror glass.
– Wipe the system of doors and windows.
– Dry furniture, sanitary equipment after cleaning.
General cleaning after construction with floor cleaning:
– During construction, floors are often difficult to clean because of many chemicals and hardening impurities. AEon Delight Vietnam post-construction cleaning service will make the floor surface clean, especially stone flooring or light-colored bricks.
– Use a vacuum cleaner to clean dust on the floor surface.
– Use specialized chemicals evenly spread on the stone floor surface for about 10 to 15 minutes to dislodge hardened stains on the floor.
– Using scrub machine + brush tray + Pad rub evenly on the floor surface to make dirt difficult to clean on floor.
– Using industrial water vacuums to absorb a lot of dirt and chemicals on many floor surfaces.
– Use specialized tools + chemicals to clean up the corner of the corner of the wall without the old machine.
– Use specialized tools and tools to dry the floor surface.
Process of receiving services General cleaning after construction:
-Receive and respond to information on cleaning service requests within the investor’s side.
– Bringing employees to zoning and reality, checking and taking over before the work begins.
– Submit quotation appropriate for the services provided.
– Sign contracts, assign employees to work as required by the school.
– Employees come to work.
– Handover and acceptance of results to the landlord.
Not only that, AEon Delight Vietnam also provides and supports services that arise as required
